McIntosh MR89

Hinta

7 990,00 (sis. alv)

Toimitusaika: 6-12 arkipäivää

McIntoshin kunniahimoisesti suunniteltu ja toteutettu FM-viritin huippulaadukkaaseen radiolähetysten nautiskeluun.

Laadukkaasti ja tinkimättömästi toteutettu vastaanottopiiri. Erittäin alhainen särö takaa puhtaan äänikokemuksen. Ulostulotason mittarit etupaneelissa. Erinomainen herkkyys, huippuluokan häiriöetäisyys, alhainen särö, selektiivisyys ja erinomainen stereo-erottelu.

Analoginen (RCA ja XLR) ja digitaalinen (optinen ja koaksiaalinen) ulostulo.

 

 

The MR89 features exclusive McIntosh radio frequency (RF) circuitry that is capable of receiving both strong FM signals from nearby stations – something that can overload and cause distortion in lesser tuners – while also being able to tune in weaker FM signals located further away with little to no noise. The MR89’s advanced signal quality monitor can display detailed signal, multipath, and noise levels of the incoming RF signals to help fine tune optimal placement of your AM or FM antenna. It comes with our RAA2 AM antenna that features a 20-foot (6m) long cable that provides flexibility in placing the antenna for the best possible radio signal reception; your McIntosh dealer will be able to assist you in choosing the correct FM antenna based on your home’s location relative to your favorite FM stations. A pair of balanced and unbalanced analog outputs along with one each of digital coax and optical outputs are included to connect the MR89 to your home audio system.

A multitude of advancements have been made in the MR89 to make your radio listening more pleasurable. Sensitivity, Signal to Noise Ratio, Harmonic Distortion, Channel Selectivity, and Stereo Separation were thoroughly analyzed and thoughtfully updated resulting in substantial performance improvements for each. A variety of new features have also been added. To help with lower quality FM stereo broadcasts, Stereo Blending has been upgraded with the introduction of a new High Blend option which blends the high frequency portion of the audio frequency range more aggressively. The new Softmute feature reduces audio output when receiving low quality stations or between-station static and noise. Another added method to reduce noise and enhance your listening experience is the new Highcut function that reduces high frequency audio content. Several aggressiveness settings are available for Stereo Blending, High Blend, Softmute, and Highcut to suit station quality and your listening preferences.

AM and FM radio stations are tuned using the smooth acting tuning knob. The MR89 supports the FM Radio Broadcast Data System (RBDS)1, allowing the display to show various information such as station name, music genre, artist name, and song title (provided such data is transmitted by the station). The RBDS data display can be adjusted or turned off entirely according to your liking. A Seek function is available through either the front panel controls or from the included remote control. The sensitivity of the Seek function is adjustable through setup menus. The MR89 can store up to 20 preset stations in both the AM and FM band.

 

” Tärkein asia, äänenlaatu, on kohdallaan. ”  Matti Hermunen / HIFIMAAILMA (6/2025)

Voit ottaa yhteyttä alla olevalla lomakkeella tai soittamalla numeroon 03 2130 750. Vastaamme puhelimeen myymälän aukioloaikoina. Tarkista aukioloajat täältä.

  • Kenttä on validointitarkoituksiin ja tulee jättää koskemattomaksi.
    Liittymällä postituslistallemme saat tuoreimmat kuulumisemme suoraan sähköpostiisi. Voit erota postituslistalta milloin haluat.

Specifications

General Specifications

  • Bands
    AM/FM
  • Rated Output
    1Vrms Unbalanced
    2Vrms Balanced
  • Output Impedance
    100 ohms Unbalanced or Balanced
  • Standby Power Requirement
    <0.5 watt

FM Specifications

  • Tuning Range
    87.5MHz – 108.0MHz (Europe)
    88.1MHz – 107.9MHz (USA)
    76.0MHz – 108.0MHz (Japan)
  • Channel Spacing
    50kHz, 100kHz or 200kHz
  • Antenna Input
    75 ohms, Type “F” Coax connector
  • Useable Sensitivity
    2uV
  • Signal To Noise Ratio
    Mono: 70dB
    Stereo: 68dB
  • Frequency Response
    ±1dB 20Hz to 18kHz
  • Total Harmonic Distortion
    Mono: 0.1%
    Stereo: 0.3%
  • Channel Selectivity
    70dB Adjacent Channel
    75dB Alternate Channel
  • Stereo Separation
    45dB

AM Specifications

  • Tuning Range
    531kHz – 1701kHz (Europe)
    530kHz – 1700kHz (USA)
    531kHz – 1629kHz (Japan)
  • Channel Spacing
    9kHz or 10kHz
  • Antenna Input
    Balanced, RJ45 connector (for use only with supplied McIntosh RAA2 Remote AM Antenna)
  • Sensitivity
    350uV/m
  • Signal To Noise Ratio
    55dB
  • Frequency Response
    ±1dB 20Hz – 1.5kHz
    -6dB 3kHz
  • Total Harmonic Distortion
    0.1%
  • Selectivity
    45dB Adjacent Channel

Connectivity

  • Balanced Fixed Output
    1
  • Unbalanced Fixed Output
    1
  • Digital Coaxial Output
    1
  • Digital Optical Output
    1
  • AM Antenna Input
    1
  • FM Antenna Input
    1
  • Service Port
    1

Digital Audio Specifications

  • Digital Coaxial Output
    0.5V p-p/75 ohm
  • Digital Optical Output
    -15dbm to -21dbm
  • Sampling Frequency
    48kHz

Control

  • Rear Panel Data Input
    1
  • Rear Panel IR Sensor Input
    1
  • Power Control Input
    1
  • Power Control Output
    1
  • RS232 Control Input
    1

Weights & Dimensions

  • Unit Dimensions (W x H x D)
    17-1/2″ (44.45cm) x 6″ (15.24cm) x 15-7/8″ (40.32cm)
  • Unit Weight
    23 lbs (10.4 kg)
  • Shipping Weight
    37.5 lbs (17 kg)