Lyra Etna

Hinta

7 000,00 (sis. alv)

Tämän tuotteen voit ostaa tai tilata myymälästämme. Kysy lisää, pyydä tarjous, ota yhteyttä!

Lyran laaturasia. Titanium-runkoinen äänirasia vaativalle. Huippumateriaaleista huippupieteetillä tehty aski. MC-rakenne Lyran tapaan.

 

Myös versiot Etna SL & Etna Mono 7800€

” HIGHLIGHT, Preis/Leistung:Uberragend , Absolute Spitzebklasse, 63 punkte ” -parhaat pisteet yhdessä Lyra Atlas-rasian kanssa!- STEREOPLAY (4/2014)

 

” One of the most neutral- yet enticing-sounding cartridge i have heard, its also one I can recommend for any system and for any sonic or musical taste. The Atlas may be Jonathan Carrs finest achievement to date – but considering its lower price, the Etna may be his greatest. ” Michael Fremer / STEREOPHILE

” Product of the year 2014 ”  STEREOPHILE

” One of the finest MC cartridges I have ever heard. Highly commended. ”  HI-FI NEWS (May 2018)

Voit ottaa yhteyttä alla olevalla lomakkeella tai soittamalla numeroon 03 2130 750. Vastaamme puhelimeen myymälän aukioloaikoina. Tarkista aukioloajat täältä.
    Liittymällä postituslistallemme saat tuoreimmat kuulumisemme suoraan sähköpostiisi. Voit erota postituslistalta milloin haluat.
  • Kenttä on validointitarkoituksiin ja tulee jättää koskemattomaksi.

Specifications for LYRA ETNA

 

Designer: Jonathan Carr

Builder: Yoshinori Mishima

Type: Medium weight, medium compliance, low-impedance moving coil cartridge

Stylus: Lyra-designed long-footprint variable-radius line-contact nude diamond (3um?70um profile, block dimensions 0.08 x 0.12 x 0.5mm), slot-mounted

Cantilever system: Diamond-coated solid boron rod with short one-point wire suspension, directly mounted into cartridge body via high-pressure knife-edge system

Coils: 2-layer deep, 6 N high-purity copper, chemically-purified high purity iron X-shaped former, 4.2 ohm self impedance, 11uH inductance

Output voltage: 0.56 mV@5 cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results)

Frequency range: 10 Hz-50 kHz

Channel separation: 35 dB or better at 1 kHz

Compliance: Approx. 12 X10 cm/dyne at 100 Hz

Vertical tracking angle: 20 degrees

Cartridge body: Multi-material (titanium, duralumin, bronze, stainless steel) self-clamping construction with reduced-surface higher-pressure headshell contact area, predominately non-parallel shaping, phase-interference resonance-controlling mechanisms, body threaded for mounting screws

Cartridge mounting screws: 2.6 mm 0.45 pitch JIS standard Cartridge weight (without stylus cover): 9.2g

Distance from mounting holes to stylus tip: 9.52mm

Recommended tracking force: 1.68-1.78g (1.72 g recommended)

Recommended load directly into MC phono input: 104 ohm-887ohm (determine by listening, or follow detailed guidelines in owner’s manual)

Recommended load via step-up transformer: 5-15 ohm (connect step-up transformer’s output to 10kohm-47kohm MM-level RIAA input, preferably via short, low-capacitance cable)

Recommended tonearm: High-quality pivoted or linear (tangential) tonearm with rigid bearing(s), adjustable anti-skating force, preferably VTA adjustment