VPI Cliffwood on amerikkalaisvalmistajan edullisin soitin. Valmistettu mallinimensä mukaisesti Cliffwoodissa, VPI:n omalla tehtaalla. Äänivarsi työstettyä alumiinia, VPI:n omaa tuotantoa. Äänirasia vakiovarusteena.

The Table:

• 1.25”” thick textured vinyl covered non-resonant MDF chassis.

• 19” x 14” x 6” overall size (48,3×35,6×15,2)

• Aluminum Platter

• Platter rotates on an oil bath bearing

• The bearing has a PEEK thrust disc and machined graphite impregnated brass bushings using a Thompson Engineering 60 Rockwell case hardened shaft.

​

Tonearm:

• New 9” vertical Yoke type tonearm with lateral type bearing.

• Pivot to spindle: 223mm

• Effective length: 240.7mm

• Overhang: 17.7mm

• Offset angle: 22.85 degrees

• Average RMS distortion: .36%

• Damped machined aluminum armtube.

• Very pure copper wire, twisted with special insulating jacket.

• The armbase is upgradeable to a standard JMW 9 arm.

For 40 years we have built turntables in American and kept it in the VPI family.  For almost 30 of those years we have built our turntables in Cliffwood, New Jersey.  With us reaching a more entry level market we are still able to make our products in Cliffwood, New Jersey.  Most companies when making entry level products source their components outside their country of origin. This is why we celebrate our heritage and our VPI workers by naming this turntable after the place they are built.

We are also excited to be teaming up with our friends from Brooklyn, Grado Labs. VPI engineered a cartridge shell specifically for the Grado to make it easier to mount and contribute to the sound signature. The VPI/Grado Green will be the factory standard mounted cartridge on all VPI Cliffwood turntables.

​

The tonearm is a 9″ machined aluminum gimbal. Both easy and robust to use while providing top level sonic performance.