Marten Coltrane Momento 2

Hinta

365 000,00 (sis. alv)

Tämän tuotteen voit ostaa tai tilata myymälästämme. Kysy lisää, pyydä tarjous, ota yhteyttä!

Marten Coltrane Momento 2 on nimestään huolimatta aivan eri kaiutin kuin edeltäjänsä. Perustuu huippumalli Supreme 2-malliin – yhteen torniin rakennettuna. Kuusi 8″ bassoelementtiä, 5″ keskiääni ja 51mm & 20mm timanttidiskantit. Takana neljä kpl 11″ passiivielementtiä.

Accutonin CELL-sarjan ultimate end-tason elementit – aika- ja vaihekoherentti rakenne. Ensimmäisen asteen jakosuodin huippuluokan komponenteista käsin rakennettuna. Keraamiset basso- ja keskiäänielementit sekä diskanttielementit timanttia.

Yhdessä massiivipuusta ja hiilikuidusta valmistetun, erittäin resonoimattoman ja tukevan kotelon kanssa, huipputason elementit ja suodinkomponentit takaavat huiipualhaisen särötason, joka alittaa monen huippuvahvistimen suorituskyvyn tässä suhteessa.

Neljä viimeistelyä puuosien suhteen; tammi, pähkinä, vaahtera ja kirsikka.

Toimitusaika noin 10-12 viikkoa.

 

Saatavana myös Statement Editiuon versio Jorma Design Stataement-sisäisellä kaapeloinnilla 384500€

 

Momento 2 uses the bespoke crossover technique developed for the Coltrane Supreme 2. The first order crossover makes for absolutely perfect time and phase coherence; and flawless time coincidence.

Momento 2 uses CELL technology developed especially for our speakers in a joint project with Accuton. The diamond tweeters and ceramic bass units are the same as those in our landmark Coltrane Supreme 2 model.

Tweeters, midrange and bass drivers have identical acoustic centres, delivering flawless phase and time coherence. The domes in the units are perfectly rigid for impeccable signal settle and piston behavior. And there is incredibly low distortion, even at high levels. Steady decay of higher order harmonics , high bandwidth.

 

Marten have refined the crossover to work perfectly with Accuton CELL drivers – a move which is defining the sound for the next generation of Marten speakers.

The first order crossover makes it possible to have perfect time and phase coherence; and flawless time coincidence. This means that all sounds are generated at the exact same moment, just like it was recorded.

Marten have refined the crossover to work perfectly with Accuton CELL drivers – a move which is defining the sound for the next generation of Marten speakers.

The first order crossover makes it possible to have perfect time and phase coherence; and flawless time coincidence. This means that all sounds are generated at the exact same moment, just like it was recorded.

Easy to position, the Momento 2’s unified cabinet is exceptionally rigid. It features an inner box constructed from solid wood and an outer box made of carbon fibre laminate and solid wood.

The front and back of the inner box are made of four 70mm thick layers of wood sandwiched together with deadening glue. The sides are constructed from 27mm thick carbon fibre laminate and 45mm of five-layered wood. As for the carbon fibre laminate; this comprises two layers of carbon sandwiched together with honeycomb Kevlar.

The lever principle in the layers of materials, combined with the slight curve of the sides, creates a ‘non-stretching’ effect to make the cabinet exceptionally strong and rigid. This reduces distortion even further, allowing the music to breathe.

With the Momento 2, we’ve achieved record low distortion. The physical distortion of the CELL drivers is less than 0.05%. What’s more, the phase and time coherence and time coincidence mean there’s zero distortion from the crossover. Combined with the incredibly rigid cabinets, this means that Momento 2 has even lower distortion than most amplifiers.

Coltrane Momento 2 employs Jorma Prime cables because we always use the highest quality components in our speakers. For the purest, clearest sound you also have the option to upgrade to our flagship line of Jorma Statement cables.

The solid stainless steel stands, sit on Black Diamond Racing pucks and cones to dampen any resonance. And the four terminals are the best money can buy: WBT Nextgen with conductors of pure silver.

We fill the inside of each Coltrane Momento 2 speaker with the just right amount of pure sheep’s wool, because it’s the perfect way to dampen them.

 

” In spite of its gargantuan dimensions (15.4″ x 65.4″ x 23.6″), the Coltrane Momento 2 was neutral, 3-D, spacious, alive, and astonishingly of a piece from top to bottom—excellent on digital and on an R2R recording of a jazz trio (where it was superb on bass, drum, and ride cymbal), and among the best I heard on my Stachmo and Chet Baker LPs. ”  Jonathan Valin / The Absolute Sound (Munich High End 2018 Show Report)

Voit ottaa yhteyttä alla olevalla lomakkeella tai soittamalla numeroon 03 2130 750. Vastaamme puhelimeen myymälän aukioloaikoina. Tarkista aukioloajat täältä.

    Liittymällä postituslistallemme saat tuoreimmat kuulumisemme suoraan sähköpostiisi. Voit erota postituslistalta milloin haluat.
  • Kenttä on validointitarkoituksiin ja tulee jättää koskemattomaksi.

Specifications

The units all employ the newly developed Cell drivers.

Speaker (front)
  • One 20mm diamond tweeter
  • One 51mm lower treble diamond tweeter
  • One 5” ceramic mid range unit
  • Six 8″ aluminium laminated sandwich low-bass drivers
Speaker (back)

Four 11” sandwich passive radiators with the bass’ lowest below 40Htz

All Momento 2 components contain
  • Crossover components with silver-gold capacitors
  • Copper foil paper in oil capacitors
  • Copper foil inductors

Tech Specs

Speaker (front)
Frequency range
20-100000 Hz +-2dB
Power rating
450 W
Sensitivity
90 dB / 1 m / 2.83V
Impedance
6 ohm (3.7 Ohm min)
Type
4-way
Crossover frequency
First order: 350, 3500 & 8000 Hz
Terminals
WBT Nextgen bi-wiring
Internal wiring
Jorma Design Prime
Cabinet
25mm:s carbon fibre laminate sides, 70mm solid laminated wood front, back, top and bottom
Stands
Polished stainless steel with Black Diamond Racing pucks and cones
Dimensions
W54 x H182 x D59 cm
Net weight
230 Kg