Nordostin huippukaapeli laatuluurien äänen parantamiseen. Micro Mono-Filament rakenne, Litz-periaatteella toteutettu Heimdall 2 Headphone Cable on FEP-eristeinen. Selkeyttä, seurattavuutta ja puhtautta lisää kuulokkeistasi. Mukana XLR-6,3mm ja XLR-3,5mm adapterit.
Lisävarusteena 2xXLR – XLR adapteri 200€ ja Extension jatkokaapeli 2m 669€
Saatavana mm.seuraaviin kuulokkeisiin: Audeze – Hifiman – Sennheiser – Oppo – AKG – Ultrasone – Abyss.
Kts.tarkempi mallikohtainen saatavuus Nordost Heimdall 2 Headphone Cable yhteensopivuus
” Both headphones all the better for it. Try these cables with your favourite headphones and see if you don’t get similar results. Highly recommended. ” HI-FI+ (March 2017)
THE HIFI+ AWARDS 2017, Personal audio cable
The Heimdall 2 Headphone Cable consists of 32 AWG 7/40 conductors which have been individually insulated and twisted using Litz construction. Litz construction increases the pliability, as well as eliminates triboelectric noise within the cable and improves upon mechanical damping. In order to accommodate the added durability demanded from headphone cables, Nordost has included an Aramid fiber strength member to the construction of this cable. Integrating Aramid fibers into the cable design not only ensures its mechanical integrity, transferring the strain away from the cable’s conductors and to the fibers themselves, but the resonating properties of Aramid fibers also enhance sound quality.
To take things to the next level, the Heimdall 2 Headphone Cable employs Nordost’s proprietary Micro Mono-Filament technology with extruded FEP insulation around the conductors, as well as mechanically tuned lengths, which reduce internal microphony and high-frequency impedance resonance. As a result, the Heimdall 2 Headphone Cable acts as the ideal conduit to transfer an amazingly realistic reproduction of sound from your system to your hifi headphones.
The Heimdall 2 Headphone Cable is available with a variety of termination options that are compatible with all major players in the headphone market. Each cable is 2M and is terminated with a 4 pin balanced XLR male connector on the source end and also includes two adapters which are comprised of identical construction and technology as the headphone cable itself, and have also been cut to specific, mechanically tuned lengths. Both adaptors are terminated with a 4 pin balanced XLR female connector on one end and either a 3.5mm stereo mini or a 1/4in stereo phono on the opposite end.
|Insulation:||Fluorinated Ethylene Propylene (FEP)|
|Construction:||Mechanically tuned lay, length and Micro Mono-Filament, 7 strand twisted Litz design|
|Conductors:||4 x 32 AWG|
|Material:||Silver-plated 99.99999% solid-core OFC|
|Velocity of Propagation:||80%|
|Terminations:||See chart (link to the right) for compatible headphones, available termination options, adapters, and extensions.|