• Five unbalanced inputs at line level using RCA connectors.
• One balanced input using XLR connectors.
• One unbalanced, RCA phono input with switchable gain, adjustable input loading, and RIAA equalization.
• One unbalanced video processor input with fixed level at unity gain for “pass-through” use.

•  Two pair of adjustable, unbalanced, outputs at line level using RCA connectors
• One pair of adjustable, balanced, outputs using XLR connectors (Pin 2 “hot”)
• One unbalanced, fixed level output at unity gain for recording using RCA connectors
• All outputs may be used simultaneously

-3 dB at 5 Hz and 200 kHz

Greater than 100 dB below 1 volt reference

Less than 0.002% from 10 Hz to 40 KHz @ 5 volts peak into  600 ohms or higher, shunted by 1,000 pF or less

50 ohms, non-reactive, balanced or single-ended

User adjustable between 47,000 and 100 ohms.  Default  setting is 47,000 ohms

User adjustable between 50 pf and 1,200 pF.  Default setting is 50 pF.

47 kohms, balanced or single-ended

User adjustable up to 18 dB.  Default setting is +8 dB

10 volts peak

Greater than 70 dB from 20 Hz to 20 KHz

Independently regulated with shielded toroidal transformer and 20,000 uF of capacitance

10 watts

Voltage is user selectable for use world-wide